4438成人网_年轻的朋友4韩剧在线观看_亚洲乱码一二三四区_四虎影视最新网站_韩国三级大全久久网站_偷妻无码一区二区三区动漫

Welcome to Jiangxi Bairui Calcium Carbonate Co., Ltd. website!
中文 | EN | Service Tel: +86-795-5288016

Analysis of properties and production process of light calcium carbonate

Time: 2019-02-27

Light calcium carbonate is also known as precipitated calcium carbonate, referred to as light calcium, molecular formula CaCO3, molecular weight 100.09. Light calcium is the calcination of limestone and other raw materials to produce lime (mainly calcium oxide) and carbon dioxide, and then add water to digest the lime to produce lime milk (mainly calcium hydroxide), and then through carbon dioxide carbonized lime milk to produce calcium carbonate precipitation, and finally by dehydration, drying and crushing. Or calcium carbonate is precipitated by sodium carbonate and calcium chloride, and then prepared by dehydration, drying and grinding. Because the sedimentation volume of light calcium carbonate (2.4-2.8mL/g) is larger than that of heavy calcium carbonate (1.1-1.4mL/g), it is called light calcium carbonate.

Light calcium property

 

White powder, tasteless, odorless, specific gravity about 2.71. Decomposition at 825 ~ 896.6ºC, melting point 1339ºC. There are two forms of amorphous and crystalline form, and the crystalline form can be divided into rhombic crystal system and hexagonal crystal system, which are columnar or diamond shaped. Insoluble in water and alcohol. It dissolves in acid and releases carbon dioxide at the same time, showing an exothermic reaction. Also soluble in ammonium chloride solution. Stable in air with slight moisture absorption.

 

Light calcium use

 

It can be used as filler in rubber, plastic, paper, paint and ink industries. Widely used in organic synthesis, metallurgy, glass and asbestos production. It can also be used as a medium seed agent for industrial wastewater, an acid agent for gastric and duodenal ulcer disease, an antidote for acidosis, a SO2 eliminating agent in SO2 waste gas, a filler for dairy cattle feed and an anti-stick agent for oil felt. It can also be used as a raw material for dental powder, toothpaste and other cosmetics.

 

Light calcium process

 

Carbonization method: After mixing limestone and white coal in a certain proportion, the finished product is obtained through high temperature calcination, water digestion, carbon dioxide carbonization, and then centrifugal dehydration, drying, cooling, crushing and screening.
CaCO3== High temperature ==CaO+CO2↑
CaO+H2O===Ca(OH)2
Ca(OH)2+ CO2===CaCO3↓+H2O

 

Characteristics of light calcium carbonate powder

 

1, the particle shape is regular, can be regarded as monodisperse powder, but can be a variety of shapes, such as spindle, cube, needle, chain, spherical, sheet and quadrangular column. These different shapes of calcium carbonate can be prepared under controlled reaction conditions.

2. Narrow particle size distribution.

3, small particle size, the average particle size is generally 1-3μm. To determine the average particle size of light calcium carbonate, the short-axis particle size of the triaxial particle size can be used as the expression particle size, and then the median particle size is used as the average particle size. Unless otherwise stated, the average particle size refers to the average short-axis particle size.

 

Process flow of light calcium carbonate

1, limestone calcination: in the lime kiln, according to the ratio of 6:1 to add limestone and anthracite, through related technology calcination auxiliary equipment, after the completion of the calcination reaction, natural cooling, ash, you can get quick lime (CaO).

2. Quick lime digestion: Add quick lime and water to the digester (chemical aircraft), dissolve and stir the slurry into the coarse slurry tank.

3. Carbonation of lime water: The lime water in the crude slurry pond (cement underground pond) enters the slurry pond after the separator (divided into 2 times,3 times the effect is better), and then the slurry of the slurry pond is pumped into the carbonization tower (cylindrical carbonization tower) to help the CO2 from the lime kiln to react at 40 ~ 50℃, the slurry will become cloudy, and the reaction can be about 2-3 hours, and then become cooked slurry. Finally, the cooked pulp is put into the settling tank.

4, drying: use centrifuge drying equipment to dry, and then go into the drying process.

5, drying: the dehydrated powder containing 30% water, into the drying furnace, at a temperature of about 200° for drying.

6, grinding: the use of air separator or air sieve and other equipment for screening, grinding after the finished product.

7. Packaging: The finished product is put into the bag with the packing machine.

8, warehousing: use forklift to transfer into the warehouse.

  
Contact us

Address: No. 33, Minzhu Road, Gaoan City, Jiangxi Province, China
Domestic Hotline: 0795-5288016/5288026
International Hotline: +86-795-5288079
Fax: 0795-5219969

Copyright(C)2023, Jiangxi Bairui Calcium Carbonate Co., Ltd. All Rights Reserved. Supported by  ChemNet ChinaChemNet Toocle
主站蜘蛛池模板: 日韩成年人视频在线 | 一本久草| 亚洲情乱| 娇妻在厨房被朋友玩得呻吟 | 成人性生交大片免费看中国A片 | 国产精品久久久久成人av | 69国产精品视频免费观看 | 又爽又色禁片1000视频免费看 | 国产精品久久久久久一区二区 | 影音先锋色小姐 | 日本国产中文字幕 | 欧美尺寸又黑又粗又长 | 99免费在线 | 日产乱码一二三区别免费麻豆 | 久久久久99一区二区三区 | 黄色日批视频在线观看 | 亚洲乱码国产乱码精品视频 | 亚洲色图都市激情 | 无码午夜福利片 | 国精一区| 国产在线观看网站 | 野花香影院在线观看视频免费 | 国产午夜精品理论片久久影院 | 亚洲精品午夜久久久久久久久久久 | 精品国产区 | 在线观看黄色 | 靠比视频在线免费观看 | 久久精品中文字幕大胸 | 国产精品久久人妻无码网站一丁 | 99精品欧美一区二区三区 | 六月丁香婷婷色狠狠久久 | 国产一级毛片不卡 | 无码人妻精品中文字幕免费时间 | 超碰欧美 | 国产真实农村乱对白精彩 | 国产黑色丝袜在线播放 | 国产AV人人夜夜澡人人爽 | 欧美视频一区二区三区四区 | 粉嫩绯色av一区二区在线观看 | 亚洲视频免费播放 | 天天舔天天爽 |